Charging Kit For Ski Doo Snowmobiles OEM Repl.# 420886608 420887657 420996829

Description

Free
shipping in USA
2 year
warranty
Same day
shipping
visit our store >
find parts for :
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Menu
Store Home
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Kit Stator + Voltage Regulator Rectifier + Magneto Flywheel for Ski-Doo Tundra 280 R Tundra 250 II 1998-2005
KEY FEATURES
 
Brand New Magneto Flywheel + Stator + Voltage Regulator Rectifier Kit
Direct replacement to your original unit. Plug-and-play, direct fit, easy installation.
Higher grade of electric components. The quality exceeds the OEM equipment.
All products shipped are tested
DESCRIPTION
 
Stator
WARNING
:Ski-Doo Tundra R 1999-2005 models ; This stator has a different visual configuration than the OEM equipment, but works perfectly and exactly as a replacement part to your OEM stator.
Brand New Magneto Flywheel + Stator + Voltage Regulator Rectifier Kit
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation
All products are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Stator
Highest grade of lamination materials
Highest grade of copper winding, resistant to 200 degrees Celsius
Back Plate included
Connector included
Voltage Regulator Rectifier
No assembly required
Higher grade of electric components
The quality exceeds the OEM equipment
Vehicle models fitment
 
Ski-doo Tundra 280 II Carb F/C -- 1998
Ski-doo Tundra 280 R Carb F/C -- 1998-2000, 2002-2005
OEM part replacement
 
RM22870-R00
Specifications
 
Stator
Dimensions :
Interior diameter : 43 mm
Exterior diameter : 110 mm
Thickness : 32 mm
Length of wires stator to grommet : 500 mm
Other specifications :
Number of wires : 7
Number of plugs : 2
Number of pins : 7
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20%
Alternator : Yellow to Ground = 0.L Source : Red to Black = 80 ohms +/-20%
Voltage Regulator Rectifier
Dimensions:
Width: 41 mm
Length: 41 mm
Height: 21 mm
Wires length: 95 mm
Fixation hole center to edge: 20 mm
Other specifications:
Number of plugs: 1
Number of pins: 3
Number of wires: 4
Flywheel
Dimensions:
Exterior Diameter: 117 mm
Interior Diameter: 96 mm
Interior Diameter Center Housing: 24 mm
Exterior Diameter Center Housing: 35 mm
Thickness (exterior): 46 mm
Thickness (interior): 23 mm
instructions
 
Before installing your new Stator and Voltage Regulator Rectifier
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".
Flywheel
Before attempting to start your Ski-Doo Tundra 300, adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulser coil and adjust as close as possible but no less than 0.010".
customer service
AsK seller a question
duties & taxes
International Buyers:
Import duties, taxes, and charges are not included in the item price
or shipping cost. These charges are the buyer's responsibility.
More than 20 years of assisting mechanics around the world resolving the worst electrical problems made us know our stuff. When it comes to vehicle electrics, we definitively are the power in powersports.
Customer service
Part request
About us
About seller page
Add seller to favorite