Filmtec XLE-4040 4" Brackish Water Reverse Osmosis Membrane

Description

FilmTec™ XLE-4040
FilmTec™ XLE-4040 Elements offer better system performance and economics for small commercial systems by operating at very low applied pressure.  FilmTec XLE-4040 elements are tape-wrapped. In addition to high quality water and low energy costs,  FilmTec membranes also deliver savings by providing long lasting and reliable performance. For added convenience, the elements are available in a dry state for rapid start-up.
Uses:
Commercial water treatment systems
Food service
Medical and research institutions
Hospitality industry
Advantages:
High flux results in high yields
High rejection provides good water quality
Typical Properties:
Applied Pressure psig (bar):
100 (6.9)
Permeate Flow Rate gpd (m3/d):
2,600 (9.8)
Stabilized Salt Rejection (%): 99.0
Operating Limits:
Membrane Type
Polyamide Thin-Film Composite
Maximum Operating Temperature
113
ºC (45ºC)
Maximum Feed Flow Rate
14 gpm (3.2 m3/hr)
Maximum Operating Pressure
600 psi (41 bar)
Maximum Pressure Drop
13 psig (0.9 bar)
pH Range, Continuous Operation
2 - 11
pH Range, Short-Term Cleaning (30 min.)
1 - 13
Maximum Feed Silt Density Index (SDI)
SDI 5
Free Chlorine Tolerance
< 0.1ppm
Maximum temperature for continuous operation above pH 10 is 95°F (35°C).
Please contact ForeverPure Corporation USA for large quantity discount.