General Kinematics Corporation Vibrating Conveyor Screen

Description

General Kinematics Corporation Vibrating Conveyor Screen
DIVISION A FINGER-SCREEN®
WE OFFER:
One (1) MODEL SC 36/48 X 17.1’ SYNCRO-COIL® FINGER-SCREEN® CONVEYOR,
36/48” wide by 24” deep by 17’-2” long. Unit is to be installed on a 0° decline, and designed to handle up to 5 TPH of ground aluminum residuals at 50-60 PCF, at ambient temperature.
Trough Construction:
Trough will be fabricated of 1/4” thick mild steel formed to make a vertical sided trough
36” wide by nominally 24” deep by 17’-2” long. The first 4’-0” will be a 3/8” thick load
distribution plate followed by two (2) removable perforated deck sections each approximately 2’-6” long. Those sections will be followed by three (3) FINGERSCREEN ® deck sections having nominal 1”” tapered slot openings. The last portion of the deck will be a solid plate to ease discharge of oversize material.
Minus 1” material passing through perforated deck and FINGER-SCREEN® sections will be conveyed on a lower deck, and will discharge at the end of the unit.
Trough Supporting System:
The SYNCRO-COIL® conveyor has a synchronized frequency trough supporting system comprised of heavy-duty coil springs and stabilizer arms. The coil reactor springs are
fabricated of high grade alloy spring steel, l00% shot peened; magna-glo inspected, and kept within conservative stress limits far below their normal fatigue stress range.
The stabilizer arms are high strength alloy castings fitted with heavy-duty steel encased rubber torsion bushings at each of the articulation points. Both springs and arms are held in place by domestically manufactured and certified high tensile bolts, hardened washer and lock nuts.
Base:
The unit will be equipped with a rugged fabricated steel base comprised primarily of standard structural members arranged for mounting in an elevated location.
Eccentric Drive:
Unit will be equipped with exclusive, patented, heavy-duty SYNCRO-CUSHION® drive wherein a solid, single piece, alloy steel machined eccentric shaft, with a fixed eccentric, operates in heavy-duty self-aligning bearings to provide suitable trough stroke. Bearings are specially designed for vibratory service and feature special internal fit.
Prices subject to prior sale.
*We will help you with all shipping and handling
coordination.
*
Price Ex-works USA……………………US,900.00
Subject to Prior sale
*We will help you with all shipping and handling coordination. *
Ozzy Sanchez
Escobar Trading, Inc.
10261 S.W. 92 Terr
Miami FL. 33176 - USA
3052183245
Whatsapp
7863997280
skype: ejehome
wwwescobartradingcom