Stator fits Yamaha OEM Repl.# 8FA-81410-00-00 8FP-81410-00-00 8FP-81410-01-00

Description

Free
shipping in USA
Same day
shipping
visit our store >
find parts for :
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Menu
Store Home
find parts for
ATV / UTV / SXS
Motorcycles
Snowmobiles
Watercraft
Other
Stator for Yamaha Apex 1000 EFI L/C 2006-2010 RX Warrior 1000 Carb L/C 2004-2005 RX-1 Carb L/C 2003-2005
Battery condition is extremely important. No stator can work correctly with a bad or weak battery.
Always fully charge your battery before performing any charging system tests or replacing parts.
If there is any doubt, have the battery load tested or replaced.
Brand new stator
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included
Connector included
Rubber grommet included
All product shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Vehicle models fitment
Yamaha Apex 1000 -- 2006-2010
Yamaha Attak 1000 -- 2006-2007
Yamaha Attak 1000 GT -- 2007
Yamaha RX Warrior 1000 -- 2004-2005
Yamaha RX-1 -- 2003-2005
OEM part replacement
8FP-81410-02-00
8FP-81410-00-00
8FA-81410-00-00
8FP-81410-01-00
Specifications
Dimensions :
Interior diameter : 54 mm
Exterior diameter : 115 mm
Thickness : 27.5 mm
Length of wires stator to grommet : 135 mm
Length of wires grommet to plug 1 : 875 mm
Length of wires grommet to plug 2 : 940 mm
Length of pickup coil's wire to grommet : 160 mm
Other specifications :
Number of wires : 5
Number of plugs : 2
Number of pins : 5
Wire to wire resistance :
Alternator : White Between Each White = 0.6 ohms +/-20%
Pickup : Black To White = 500 ohms +/-20%
instructions
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
SHIPPING
We deliver 99.4% of our orders within the specified time period. If your item is not available in our main Colorado facility, we still guarantee that your order will be delivered within the specified time period.
If your item is not delivered within this time period, we will offer you a 5.00$ discount on your order. This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.
Videos
customer service
AsK seller a question
duties & taxes
International Buyers:
Import duties, taxes, and charges are not included in the item price
or shipping cost. These charges are the buyer's responsibility.
RaceTech Electric was founded in 2011 by three motorcycle industry veterans in San Diego, CA. The group has over 20 years combined in the Motorcycle industry.
Customer service
Part request
About us
About seller page
Add seller to favorite